57666 Suzuki RM2509

16-16 REAR SUSPENSION

REAR SHOCK ABSORBER REASSEMBLY

•    Apply the rear suspension oil to the O-rings and the “teflon coating metal”.

•    Insert the damper rod assembly ® and tit the new circlip (2).

•    Puli up the damper rod assembly © until it is stopped by the circlip®.

•    Fit the stopper to the shock absorber body.

•    Fili the specified rear suspension oil in the rear shock absorber. (CC7"16-13)

j| 99000-99001-S25: SUZUKI REAR SUSPENSION OIL

SS-25

RESKI Oil capacity: Approx. 380 ml (12.84/13.38 US/Imp oz)

•    Reinstall the compression adjuster assembly. (CU"16-14)

•    Pressure the rear shock absorber unit with nitrogen gas to 981 kPa (9.8 kgf/cm², 139.5 psi). (IT7M6-14)

•    Reassemble the spring and adjust the spring set length. ((T7M 6-10)

•    Tighten the valve cap.

•    Remount the rear shock absorber to the tramę. (Cd^l 6.-1 0)’"n

\ \

REAR SHOCK ABSORBER DISPpS^ N^

High pressure nitrogen gas is sealed in the rear shoók;absorber unit. Be surę to release gas before disposing the reąr. shóck absorber unit.    \ \\\ \ \ -^;'

•    Remove the valve cap.

Press the valve with a screwdrlyer. \ •

A WARNING

Releasing high pressure gas from the rear shock absorber unit can be hazardous.

Place a rag over the valve and push the valve with a screwdriver to release nitrogen gas. Do not use your finger to push the valve, and direct the valve away from your face and body.

Wyszukiwarka

Podobne podstrony:
suzuki rm250
89 16-16 REAR SUSPENSIONREAR SHOCK ABSORBER REASSEMBLY •    Apply the re
74408 Suzuki RM2501 16-8 REAR SUSPENSION nssi •    Remove the rear shock absorber up
suzuki rm250
77 16-4 REAR SUSPENSIONREBOUND DAMPING FORCE ADJUSTMENT •    Turn the ad
suzuki rm250
79 16-6 REAR SUSPENSIONREAR SUSPENSION After the sag measurement has been set between 1
suzuki rm250
83 16-10 REAR SUSPENSION •    Apply grease to the needle roller bearings
suzuki rm250
85 16-12 REAR SUSPENSIONOIL REPLACEMENT PROCEDURĘ •    Remove the rear s
suzuki rm250
87 16-14 REAR SUSPENSION •    Reinstall the compression adjuster assembl
suzuki rm250
88 REAR SUSPENSION 16-15 •    Vise the rear shock absorber unit in inver
suzuki rm250
93 16-20 REAR SUSPENSION •    Tighten the rear cushion lever nut to the
25868 Suzuki RM2501 16-18 REAR SUSPENSION Jtć* Remove the spacers. Dust seal Washer Thrus
Suzuki RM2507 16-4 REAR SUSPENSIONREBOUND DAMPING FORCE ADJUSTMENT •    Tum the adju
Suzuki RM2507 16-14 REAR SUSPENSION •    Reinstall the compression adjuster assembly
Suzuki RM2508 REAR SUSPENSION 16-15 ♦    Vise the rear shock absorber unit in invert
Suzuki RM2503 16-20 REAR SUSPENSION 16-20 REAR SUSPENSION •    Tighten the rear cush

więcej podobnych podstron