79721 tmta6

21. Sleeve for Fig 18

A tapered sleeve with pleats at the shoulder, drafted in two stages from the sleeve Błock, a. Stage 1 Enlarging the sleeve head to match the armhole

Measure the armhole and add the increase, here 3 cm, as shown in Blocks, Fig 25. Add half the increase at FL, opening it for its fuli length. Divide the other half between the upper and lower BP. The provisional sleeve head shape is shown by the broken linę.

156

Wyszukiwarka

Podobne podstrony:
86818 tmta1 19. Bodices for Fig 18 a.    Enlarged bodice with four slanted slas
tmta6 21    sp - 21. Finished sleeve draft Tracę the draft (Fig 20), turn it over al
27184 tmta4 150 cm Fold-^ 20. Fuli pattern and layout for Fig 18 The patterns are shown on cloth 15
61893 tmta6 Platę 2. Fastening for a mitten sleeve A mitten sleeve, shown unbuttoned. It was worn m
28269 tmta0 b. Cutting diagram for a. Shaping is shown by fine lines. When the Back and Front are s
milo 01 06 PRELIMINARY £X£RCI5E NO. 5 For Ilia Waitt R*
milo 01 06 PRELIMINARY £X£RCI5E NO. 5 For Ilia Waitt R*
290 (36) 262Dress Accessońes 1354 SWA81 542 (2012) 11 fig 169 d 30mm; fleur de lis at the end of eac
tmta9 Slits for fitchets, slasbes for sleeves, These slits (Surcotes, Fig 5; Gowns, Fig 18) are wor
81324 tmta1 27    sp 27. Sleeve for Fig 24 This narrow sleeve has an extension formi
tmta 0 20 cm 5 66. Short sleeve for Fig 2 This later sleeve reaches about halfway down the upper arm

więcej podobnych podstron