87424 Suzuki RM125 1

REAR SUSPENSION 17-11

REASSEMBLY

♦ Apply the rear suspension oil to the O-rings and the leflon coating metal".

♦ Insert the damper rod assembly © and lit a new circlip (2>.

♦ Puli up the damper rod assembly © until it is stopped by the circlip <D.

♦ Fit the stopper to the shock absorber body.

♦ Fili the specified rear suspension oil in the rear shock absorber. (0^17-8)

SS-25

H Oil capacity: Approx. 380 ml (12.84/13.38 US/Imp oz)

♦ Reinstall the compression adjuster assembly. (d7"17-8)

♦ Pressure the rear shock absorber unit with nitrogen gas to 981 kPa (9.8 kgf/cm², 139.5 psi), (im 7-9)

♦ Reassemble the spring and adjust the spring set length. (0=17-4)

♦ Tighten the valve cap.

Install the rear shock absorber in the reverse\drder

Pay attention to the following pointa: \ V \ * W \

\ \ \ '■> \ \ \

♦ Lifting up the swingarm, jnstall.the rear shock absorber to the

cushion lever. /©-, \ W^->

♦ Tighten the lower mountjng ,bplt. and nut to the specified

torque. J }

<^m' /

H Rear shock absorber lower mounting nut:

♦ Tighten the upper mounting bolt and nut to the specified torque.

H Rear shock absorber upper mounting nut: