A6 2 0 (140 koni) automat napinacz

Audi A6 (94-97) 2,0 1994-97 Engine codę: ACE

Impoitant notę

Replacement lnteival Guide

Check Foi Engine Damage

Repaii Times - his

Special Tools

Special Piecautions

Removal

Installation

1. Ensure timing marks aligned [2] & [4].

2. If cylinder head cover removed: Ensure camshaft sprocket rear timing mark aligned (11 ]. NOTĘ: Notch aligned with upper cylindei head face.

3. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket.

4. Tum tensioner anti-clockwise until it touches stop. Use wrench Matra V.159 [9].

5. Release tension until marks align exactly [10].

NOTĘ: Engine inust be cold.

6. Tighten tensioner nut. Tightening torque: 25 Nm [8].

7. Tum crankshaft two turns clockwise. Ensure timing marks aligned (2) & (4).

8. Check tensioner marks aligned [10].

9. If not: Repeat tensioning procedurę.

10. Apply firm thumb pressure to belt at^. Tensioner marks must move apart (10).

11. Release thumb pressure from belt at^.

12. Tum crankshaft two turns clockwise. Ensure timing marks aligned (2) & (4).

13. Tensioner marks should realign (10).

14. Install components in reverse order of removal.

15. Tighten crankshaft pulley bolts. Tightening torque: 20 Nm (5).

NOTĘ: Crankshaft pulley bolt holes aie offset.