56409 MR293R190'9 1

Take the raa3tlc cartridge, pierce the membranę wlth a serewdriver and aorew on the noz2le.

Then pierce the metal oapsule on the base of the cartridge.

Using a spray gun, apply the bead of mastic, guiding the nozzle along the moulding support.

Using a spatula, smooth down the join where the two ends of the bead meet.

Before fitting the windscreen, turn over the lower corners of the moulding to make it easier to fit the window on the aperture.

U3ing two pairs of suetion pada, offer up the windscreen to the aperture, centring it at the same time. To do this, move the moulding support so that it is right up against the edge of the roof. The windscreen is centred laterally by eomparing the upper corners of the glass with the roof corners on each slde.    The    lower    edge of    the

windscreen must rest on the wedges.

Fold down the lower corners of the moulding under the wings.

BOTE:    The vehicle must be left

3tationary for at least 3 houra. You are atrongly reoommended to use thi3 time to run water    over    the    edge of    the

windscreen, firstly, to find out lf the sealing is    faulty    at    any point    and,

secondly,    to    aocelerate    the

polymerisation of the mastic.

Wyszukiwarka

Podobne podstrony:
14 John will take the dog to the vet. ŚWIAT PRZYRODY Module 13 - Naturę; zaimki względne 1
mb 39 MUSCLE BUILDENG.    3J a day. Ile was so much bcnefited by the first that he co
MR293R19055 1 Adjustinq the Front Latchns Adjusting the Aide Eccentrics Łiii^ Adjusting the Latch R
MR293R19067 1 Remove: -    the hood striker plates, -    the seal, Ap
MR293R19095 1 Fit the tikirt in place on the front and rear elips. Mark and tram t.hr location of t
MR293R19077 1 Dlsconneot the battcry, remove the luggage compartment carpet and the lefthand and ri
MR293R19081 1 TIGHTEHING THE BARS The bars muat be aeoured uniformly and equally on both sides usin
MR293R19084 1 1    - Remove the Tor* type screw and pla3tic oap located in the base
MR293R190&7 1 BONDING THE WINDOWS (aee aection entitled " WINDOWS -Windscreen and rear aoreen&q
MR293R190&9 1 Remove the trim. Electric lock REHOYING THE LOCK The method for removing the two locks
4 Napisz pytania i krótkie odpowiedzi. 1    he / take / the
22086 MR293R19074 1 Free the two corresponding cloth sections At the front, remove the rivet froro

więcej podobnych podstron