88 1a78f80731

6. Measure:

•Clutch spring free length (T)

Out of specification-> Replace spring as a set.

7. Inspect:

•Dogs on the clutch housing Cracks/Wear/Damage-^Deburr or replace. •Clutch housing bearing Scoring/Wear/ Damage-* Replace clutch housing.

NOTĘ: _

Scoring on the clutch housing dogs will cause erratic operation.

8. Inspect:

• Clutch boss splines

Scoring/Wear/Damage-* Replace clutch boss.

NOTĘ: _

Scoring on the clutch boss splines will cause erratic operation.

9. Check:

•Circumferential play Free play exists->Replace.

10. Measure:

•Push rod runout Out of specification-> Replace.

----

Bending Limit:

0.2 mm (0.008 in)

4-18

Wyszukiwarka

Podobne podstrony:
83 6f6936accc INSPECTION AND REPAIRENG m 4-13 Warpage measurement and resurface-ment steps: •Attach
84 5c90f6ee81 INSPECTIOIM AND REPAIR 5. Measure: •Piston-to-cylinder clearance Pisto
85 ec002ba75d INSPECTION AND REPAIRENG § Piston size P Standard 39.96 - 39.98 mm (1.573-1.574
86 4c6f346dff INSPECTION AND REPAIRENG m 0.15-0.35 mm (0.006 - 0.014 in) 2.    Instal
87 1160047f2c INSPECTIOIM AND REPAIR 5.    Check: • Free play (when the piston pin is
92 eaef762dcf INSPECTION AND REPAIRENG
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)VALVE Unit: mm (in)Valve s
Suzuki RM250 9 14 GENERAL INFORMATION A WARNING *    Proper semce and repair procedur
Ford Mondeo Service And Repair Manual Ford MondeoService and Repair ManuałJeremy Churchill and A K L
T elemobisieBrandmg and identity2013 CHALLENGE Market of Stores selling and repairing phones is fill
46705 Suzuki RM250 PERIODIC MAINTENANCE 2-9TRANSMISSION OIL TRANSMISSION OIL LEVEL INSPECTION 
65 56e95422d8 INSP ■C3 ADJ mtm CABLE INSPECTION AND LUBRICATION/LEVER AND PEDAŁ LUBRICATION/SIDESTA
7 94078f0582 CHAPTER 3.PERIODIC INSPECTION AND
Valve seatSERVICE DATA AND SPECIFICATIONS (S.D.S.)_Inspection and Adjustment (Cont d)_ INTAKE 1.5
SERVICE DATA AND SPECIFICATIONS (S.D.S.)__Inspection and Adjustment (Cont d)- Main journal inner
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)Piston ring Unit: mm (in)C
89 TransAlp Manual Clutch Gearshift Linkage 7 6 CLUTCH/GEARSHIFT LINKAGE Measure the spring free len

więcej podobnych podstron