REAR WHEEL/BRAKE/SUSPENSION

Pack the bearing cavities with grease.

Install the driven flange collar to a new flange bearing from the non-sealed side as shown.

CAUTION

• Do not damage the bearing.

fi > COLLAR

(2> DRIVEN FLANGE BEARING

Drive in the driven flange bearing with its sealed end facing out.

TOOLS:

Driver    07749-0010000

Attachment, 42 x    47 mm    07746 — 0010300

Pilot, 17 mm    07746-0040400

Install the damper rubbers.

Apply grease to a new O-ring and install it onto the groove of the wheel hub.

Pack the inside of the driven flange with grease.

Install the driven flange.

Apply grease to the dust seal lip and install it.

Install the side collar.

Install the driven sprocket if removed.

NOTĘ

• When tightening the driven sprocket bolts and nuts, apply oil to the threads of the bolts.

(1) SPROCKET BOLTS

(2) COLLAR*

TOROUE: 44 N-m (4.4 kg-m, 32 ft-lb)

I DUST

14-6