suziki rm12500

17-10 REAR SUSPENSION

•    Vise the rear shock absorber unit in inverted position.

•    Depress the bump rubber fully to protect the damper rod.

Evenly hammer the stopper © with a screwdriver or equiva-lent and remove it from the rear shock absorber body.

Depress the seal case (D with a screwdriver until the is fully exposed.    r

• Remove the circlip ®.

NOTĘ:

Do not scratch the inner surface of the shock absorber body to avoid oil leaks.

•    Extract the damper rod assembly from the shock absorber body.

•    Inspect the oil seal and O-rings.

•    Inspect the damper rod for bends and scratches.

•    Inspect the inner surface of the body.

•    Inspect the “teflon coating metal” on the piston.

•    Replace O-rings with new ones.

•    Replace the “teflon coating metal” by cutting off the old one and putting a new one onto the piston if necessary.

Wyszukiwarka

Podobne podstrony:
Suzuki RM125 0 17-10 REAR SUSPENSION •    Vise the rear shock absorber unit in invert
Suzuki RM125 0 17-10 REAR SUSPENSION •    Vise the rear shock absorber unit in invert
suzuki rm250
88 REAR SUSPENSION 16-15 •    Vise the rear shock absorber unit in inver
Suzuki RM2508 REAR SUSPENSION 16-15 ♦    Vise the rear shock absorber unit in invert
suziki rm12502 17-12 REAR SUSPENSIONDISPOSAL High pressure nitrogen gas is sealed in the rear shock
suziki rm12506 17-16 REAR SUSPENSION 17-16 REAR SUSPENSIONINSTALLATION •    Reassemb
suziki rm12508 17-18 REAR SUSPENSION • Insert the spacers into the bearings and inspect them for pl
suziki rm12510 17-20 REAR SUSPENSION • Tighten the cushion lever, cushion rod and swingarm nuts to
Suzuki RM125 2 17-12 REAR SUSPENSIONDISPOSAL High pressure nitrogen gas is sealed in the rear shock
Suzuki RM125 2 17-12 REAR SUSPENSIONDISPOSAL High pressure nitrogen gas is sealed in the rear shock
suzuki rm250
85 16-12 REAR SUSPENSIONOIL REPLACEMENT PROCEDURĘ •    Remove the rear s
suziki rm125
94 17-4 REAR SUSPENSION •    Lifting up the swingarm, remove the rear sh
suziki rm125
95 REAR SUSPENSION 17-5INSPECTION •    Inspect the rear shock absorber f
suziki rm125
96 17-6 REAR SUSPENSION 17-6 REAR SUSPENSION • Install the dust seals. NOTĘ: When insta
suziki rm125
98 17-8 REAR SUSPENSION 17-8 REAR SUSPENSION • Pour the fresh specified rear suspension
Suzuki RM1255 REAR SUSPENSION 17-5INSPECTION ♦    Inspect the rear shock absorber fo

więcej podobnych podstron