plik


’ž3220 J. Am. Chem. Soc. 2000, 122, 3220-3221 Table 1. Oxidation of Water-Soluble Alkenes by Hydrogen Epoxidation of Alkenes with Bicarbonate-Activated Peroxide in Sodium Bicarbonate (1 M) Solutions in D2O (25 °C)a Hydrogen Peroxide Huirong Yao and David E. Richardson* Center for Catalysis, Department of Chemistry UniVersity of Florida, GainesVille, Florida 32611-7200 ReceiVed NoVember 8, 1999 We describe here the discovery of the bicarbonate-catalyzed epoxidation of alkenes with aqueous hydrogen peroxide at near- neutral pH. For some substrates, the procedure is comparable in apparent synthetic utility to the best methods now available for H2O2-based alkene expoxidations that avoid extensive hydrolytic formation of diol (e.g., ligand-accelerated methyltrioxorhenium/ H2O21). The new process features a stable main group catalyst/ activator of unexpected simplicity (bicarbonate ion) and can be a 1 applied readily in water or mixed aqueous solutions under Product analysis by H NMR. All reactions without bicarbonate gave no detectable epoxide products after 24 h. Dibasic ammonium homogeneous conditions. phosphate was employed to maintain similar ionic strength and pH of Hydrogen peroxide is a high oxygen content, environmentally reaction media in the control reactions. friendly oxidant for which water is the sole byproduct in heterolytic oxidations,2 but it is a slow oxidant in the absence of oxidant peroxymonocarbonate ion, HCO4-, is formed with t1/2 H" activation3 due to the poor leaving tendency of the hydroxide 5 min (eq 1), presumably via the perhydration of CO2 ion.4 Transition metal salts or complexes have been used as catalysts for alkene epoxidations with aqueous H2O2 .5,6 Other H2O2 + HCO3- h H2O + HCO4- (1) methods for activation of H2O2 include forming reactive peroxy- acids from carboxylic acids,7 forming peroxycarboximidic acid Peroxymonocarbonate is an anionic peracid with structure from acetonitrile (Payne oxidation),8 generation of peroxy- HOOCO2-.14 Kinetic and thermodynamic investigations of eq 1 isourea,9 or using sodium perborate or sodium percarbonate (Na2- give a value of E0 (HCO4-/ HCO3-). 1.8 V (vs NHE), and HCO4- CO3 1.5H2O2) in strongly basic solution.10 Such systems can have is therefore a potent oxidant in aqueous solution. The maximum one or more disadvantages, such as toxic or rapidly decomposed catalytic efficiency for oxidation of organic sulfides is observed metal catalysts, oxidative decomposition of organic ligands, in the pH range from 7 to 9, and the oxidation reactions are organic byproducts, or strongly acidic or basic reaction conditions accelerated by increasing solvent water content.15 The reactivity that decompose the desired epoxide product. of HCO4- toward sulfides suggested to us that it may also be A method for activating hydrogen peroxide with bicarbonate useful in the preparation of epoxides in water and mixed solvents, ion was described by Drago and co-workers11 and Richardson et and this was confirmed in the work described below. al.12 in their studies of sulfide oxidations in alcohol/water solvents. The oxidation of water-soluble alkenes was carried out in D2O In the bicarbonate-activated peroxide (BAP) system,13 the active in an NMR tube with a stoichiometric excess of H2O2 (1.5-6.0 * To whom correspondence should be addressed. Telephone: (352) 392- equiv). For example, 1 mL of 0.1 M 4-vinylbenzenesulfonate with 6736. Fax: (352) 392-3255. E-mail:der@chem.ufl.edu. 1 M NaHCO3 was prepared in D2O, and 30% H2O2 was added (1) (a) Rudolph, J.; Reddy, K. L.; Chiang, J. P.; Sharpless, K. B. J. Am. 1 (final [H2O2] ) 0.15 M, pH 8). H NMR studies gave a t1/2 value Chem. Soc. 1997, 119, 6189. (b) Herrmann, W. A.; Ding, H.; Kratzer, R. M.; of 1.5 h for the initial disappearance of alkene, and after 15 h, Kühn, F. E.; Haider, J. J.; Fischer, R. W. J. Organomet. Chem. 1997, 549, 319. the starting material was converted to epoxide (90%), diol (5%), (2) Sheldon, R. A. Top. Curr. Chem. 1993, 164, 21-34. and other byproducts (5%). The same procedure was applied to (3) (a) Strukul, G. Catalytic Oxidation with Hydrogen Peroxide as Oxidant; several other water-soluble alkenes (Table 1). In all cases, Kluwer: Dordrecht, 1992. (b) MBochowski, J.; Said, S. B. Pol. J. Chem. 1997, 71, 149. reactions without added bicarbonate salt are negligible after 24 h (4) Edwards, J. O. In Peroxide Reaction Mechanisms; Edwards, J. O., Ed.; under similar conditions (as a control, replacement of NaHCO3 Interscience: New York, 1962; pp 67-106. by (NH4)2HPO4 provided comparable ionic strength and pH). The (5) Jacobson, E. N. In ComprehensiVe Organometallic Chemistry II; Abel, E. W., Stone, F. G., Wilkinson, E., Eds.; Pergamon: New York, 1995; Vol. water-soluble alkenes in Table 1 are mostly terminal alkenes with 12, p 1097. nearby electron-withdrawing groups. The low electron density (6) (a) Tetzlaff, H. R.; Espenson, J. H. Inorg. Chem. 1999, 38, 881. (b) of these alkenes usually reduces their nucleophilicity toward Venturello, C.; Alneri, E.; Ricci, M. J. Org. Chem. 1983, 48, 3831. (c) De Vos, D. E.; Sels, B. F.; Reynaers, M.; Rao, Y. V. S.; Jacobs, P. A. Tetrahedron electrophilic oxygen of peroxyacids.16 The last two entries in Table Lett. 1998, 39, 3221. 1 show that under the aqueous conditions of these reactions, (7) (a) Swern, D. In Organic Peroxides; Swern, D., Ed.; Wiley-Inter- readily hydrolyzed epoxides are partially converted to diols. This science: New York, 1971; Vol. 2, p 355. (b) Lewis, S. H. In Oxidation; Augustine, R. L., Ed.; Marcel-Dekker: New York, 1969; Vol. 1, p 213. hydrolysis can be suppressed by using solvents with lower water (8) Payne, G. B.; Deming, P. H.; Williams, P. H. J. Org. Chem. 1961, 26, content.17 659. We found that the BAP system can be applied to a variety of (9) Majetich, G.; Hicks, R. Synlett 1996, 649. (10) McKillop, A.; Sanderson, W. R. Tetrahedron 1995, 51, 6145. homogeneous alkene oxidations (including epoxidation of terminal (11) Drago, R. S.; Frank, K. M.; Yang, Y.-C.; Wagner, G. W. Proceedings of 1997 ERDEC Scientific Conference on Chemical and Biological Defense (15) Although used in large concentrations, bicarbonate is a catalyst so Research; ERDEC, 1998. the oxidations described here are low E factor reactions, in contrast to (12) Richardson, D. E.; Yao, H.; Xu, C.; Drago, R. S.; Frank, K. M.; stoichiometric activators where a leaving group becomes a byproduct. See Wagner, G. W.; Yang, Y.-C. Proceedings of 1998 ERDEC Scientific Sheldon, R. A. J. Chem. Technol. Biotechnol. 1997, 68, 381. Conference on Chemical and Biological Defense Research; ECBC, 1999. (16) (a) Prat, D.; Lett, R. Tetrahedron Lett. 1986, 27, 707. (b) Prat, D.; (13) Richardson, D. E.; Yao, H.; Frank, K. M.; Bennett, D. J. Am. Chem. Delpech, B. Lett, R. Tetrahedron Lett. 1986, 27, 711. (c) Stevens, H. C.; Soc. 2000, 122, in press. Kamen, A. J. J. Am. Chem. Soc. 1965, 87, 734. (14) (a) Flanagan, J.; Jones, D. P.; Griffith, W. P.; Skapski, A. C.; West, (17) Conversion rates are lower in mixed organic/aqueous solvents, in part A. P. J. Chem. Soc., Chem. Commun. 1986, 20-21. (b) Jones, D. P.; Griffith, because bicarbonate solubility decreases and less catalyst can be used; however, W. P. J. Chem. Soc., Dalton Trans. 1980, 2526-2532. (c) Adam, A.; Mehta, bicarbonate salts with alkylated ammonium cations can be used to increase M. Angew. Chem., Int. Ed. 1998, 37, 1387-1388. catalyst solubility (Yao, H.; Richardson, D. E., work in progress). 10.1021/ja993935s CCC: $19.00 © 2000 American Chemical Society Published on Web 03/16/2000 Communications to the Editor J. Am. Chem. Soc., Vol. 122, No. 13, 2000 3221 Table 2. Epoxidationa of Alkenes by Hydrogen Peroxide with allylic alcohols is that the major products are usually the Ammonium Bicarbonate in CD3CN/D2O (3:2, v:v)b rearranged epoxides, i.e., terminal epoxides. It is necessary to distinguish the mechanism of alkene oxida- tions with the BAP system in CH3CN/H2O from that of Payne s procedure8 in alcoholic solvent. Payne oxidations employ a slight excess of stoichiometric acetonitrile in alkaline hydrogen peroxide solution to produce a peroxycarboximidic acid, which oxidizes alkenes. The byproduct acetamide is obtained stoichiometrically from the reaction of peroxycarboximidic acid with alkene or hydrogen peroxide. In our study, oxidation of 4-vinylbenzene- sulfonate with the BAP system in the presence of a stoichiometric 1 amount of acetonitrile in D2O was investigated by using H NMR. Over 90% of the alkene was converted to its epoxide product in 1 24 h, but no acetamide was detected in the H NMR spectrum. In contrast, replacement of NaHCO3 (pH. 8.4) or NH4HCO3 (pH. 8.0) by Na2CO3 (pH. 10.5) gave no oxidation products of the alkene after 24 h, but acetamide was formed. We conclude that the role of acetonitrile in the BAP system is to provide for substrate solubility and maintain high solvent polarity, favoring epoxidation by HCO4-.20 The mechanism for HCO4- epoxidation may be closely related a Stoichiometry: alkene <"0.05 M, hydrogen peroxide <"0.3 M and to that for typical peracids, i.e., the generally accepted butterfly b ammonium bicarbonate <"0.2 M; 25 °C. All reactions without transition state,21 except that the proton transfer is to a carbonate- bicarbonate gave negligible epoxide products after 24 h, except for leaving group (A) rather than to a carboxylates. Since the BAP 3-methyl-2-buten-1-ol (10% conversion to epoxide in 24 h). Dibasic reactions here are in aqueous or mixed aqueous solution, the ammonium phosphate was employed in controls to maintain similar c ionic strength and pH of reaction media. All allylic epoxides rear- intramolecular proton transfer that reduces charge separation in d ranged to form terminal epoxides as the major product. The epoxide the transition state could also occur by solvent participation (e.g., e was not stable; decomposition products not identified. Mixture of B). Further studies on the detailed mechanism are in progress. statistically distributed epoxide products. alkenes, internal alkenes, and allylic alcohols) if a mixed solvent system is used. By using acetonitrile/water (3:2 v:v), epoxidations of hydrophobic alkenes were accomplished with H2O2 and NH4- HCO3 (<"0.2 M) at room temperature (Table 2). Oxidation of styrene was followed in CD3CN/D2O (3:2, v:v) by using NMR. Addition of styrene (0.05 M) to a solution of 13 H2O2 (0.3 M) and NH4HCO3 (0.2 M) yielded styrene oxide (40%) Our C NMR studies on H13CO4- formation from H13CO3- as the only product after 24 h. Because of peroxide dispropor- with 2 MH2O2 in CH3CN/H2O (3:2, v:v) indicate Keq (eq 1) a" tionation, excess hydrogen peroxide is needed to give a high yield [HCO4-][H2O]/[HCO3-][H2O2] H" 35 (25 °C) with a t1/2 <5 min of epoxide, and the epoxidation reaction was attempted prepara- (pH ) 7.4). After 20 h, <"50% of H2O2 is consumed by tively in CH3CN/H2O (3:2, v:v). With 0.19 M NH4HCO3, 10 equiv decomposition based on the integration ratio of H13CO3- and of 30% aqueous H2O2 gave styrene oxide in 75% distilled yield.18 H13CO4- in the spectrum. Therefore, decomposition of hydrogen Other unfunctionalized alkenes in Table 2 (R-methylstyrene and peroxide in acetonitrile is relatively slow compared to the norbornene) form epoxide as the major product. The rate of alkene formation of HCO4-. Oxidation reactions of alkenes with moder- oxidation decreases significantly by replacement of acetonitrile ate reactivity can be achieved by forming HCO4- with a small with alcohol, e.g., ethanol or tert-butyl alcohol. For example, only excess of H2O2 despite the accompanying decomposition of H2O2 trace oxidation products were detected for styrene after heating in the presence of CH3CN as a cosolvent.22 Catalyst lifetime is to 45 °C for 2 days in d6-EtOH/D2O (3:2, v:v) with H2O2 (0.3 not a major concern given the low cost and high stability of M) and NH4HCO3 (0.2 M).19 bicarbonate ion. BAP oxidations of various allylic alcohols were also investi- We believe BAP oxidations can be useful when a mild, low gated. Allyl alcohol (0.1 M) and 2-cyclohexen-1-ol (0.1 M) have environmental impact oxidation method is desirable.23,24 Some the least reactive double bonds, and only trace oxidation products limits to the utility of the method remain to be overcome (e.g., are observed for dilute H2O2 (0.3 M) with NH4HCO3 (0.2 M) in low conversions for less nucleophilic substrates, hydrolysis of CD3CN/D2O after 24 h. Allylic alcohols with more substituted sensitive epoxides). Kinetic studies and development of optimal double bonds are epoxidized by the BAP system under similar catalysts and synthetic methods for alkenes and other substrates conditions (Table 2). For all of the allylic alcohols epoxidation are in progress. is strongly preferred over alcohol oxidation. In the case of JA993935S geraniol, both allylic and remote alkene are oxidized with comparable rates. A striking feature in the BAP oxidation of these (20) In addition, the same reaction was carried out in mixed CD3CN/D2O (18) Procedure: 6.30 g of NH4HCO3 (79 mmol) and 38 mL of H2O2 (30%, (1:7, v:v) solvent that was buffered with (NH4)2HPO4 to maintain similar pH 360 mmol) were dissolved in 130 mL water, mixed with 240 mL of and ionic strength compared to a bicarbonate solution, and only 5% of alkene acetonitrile, and 4 mL of styrene (35 mmol) was added. The rt reaction was conversion was observed after 24 h. In contrast to the simplicity of the allowed to proceed in the dark without stirring for 24 h. The reaction mixture homogeneous BAP procedure, the Payne procedure requires stirring and was diluted with 200 mL of water and extracted with chloroform (5 × 200 continuous addition of peroxide and base, mL). The filtrate was washed with water (2 × 40 mL), dried, and concentrated (21) See Bach, R. D.; Glukhovtsev, M. N.; Gonzalez, C. J. Am. Chem. by removal of solvent. Fractional distillation of the crude product gave 3.1 g Soc. 1998, 120, 9902-9910 and references therein. of styrene oxide (75%). (22) As was found in Payne s study, decomposition of H2O2 is significantly (19) The observations of solvent dependence in the BAP epoxidations accelerated in the higher pH media of CH3CN/H2O with added Na2CO3, and contrast with those for the H2O2/dicyclohexylcarbodiimide (DCC) system acetamide byproduct is observed. reported by by Majetich and co-workers.9 The best solvents for the DCC- (23) Bolm, C.; Beckman, O.; Dabard, O. A. G. Angew. Chem., Int. Ed. activated epoxidation are hydroxylic ones such as methanol, ethanol or 1999, 38, 907. 2-propanol (except pure water). (24) Dartt, C. B.; Davis, M. E. Ind. Eng. Chem. Res. 1994, 33, 2887.

Wyszukiwarka

Podobne podstrony:
epoxidation h2o2 mnso4
ActivationDataFlavor
activate gps
activate gps
activate gps
Aktywacja AC2012 How to install and activate the program
activa iu pl08(2)
Activating divine light
ActivateFailedException
activate gps
ActivationInstantiator
Activator
activate gps
activate gps
activate gps
ActivationDesc

więcej podobnych podstron