plik


ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00 www.cobra.it PETROL AUDI A3* 03 ’! DIESEL ’! MAKE MOD. YEAR X * Models with original equipment keyless entry system. ALARM/SIREN Position the compact alarms and the sirens on the support near the locking of the bonnet. POSITION CENTRAL UNIT Position the modular sistems and the modules under the central tunnel or under the POSITION passenger s side seat. POWER SUPPLY +30: connect directly to the positive pole of the battery. -31: connect directly to the ground terminal located behind the driver s side sill cover. IGNITION WIRE +15/54: connect to the 2 mm2 BLACK wire, in the wiring harness coming out of the fuse box located on the left side of the dashboard. DIRECTION INDICATORS Ant. and post. direction indicators Connect to the BLACK/WHITE wire at the position nr. 11 in the 21 way light brown connector, marked  D ; BLACK/GREEN wire at the position nr.10 in the black connector marked  B ; BLACK/WHITE wire at the position nr.8 and BLACK/GREEN wire at the position nr.6, in the 12 way black connector, marked  A . To make the connection it is necessary to separate the lines by means of diodes. Connections antitheft/vehicle ACTIVAT./DEACTIVATION Refer to the fitting diagram nr.187. CONTROLS IMMOBILISATION POINT Gasoil pump Cut the 1mm2 BLUE/BLACK wire, at the position nr.27, behind the fuse box. STARTER +50: Cut the 0,35 mm2 RED/BLACK wire, at the position nr.1, in the 12 way black connector, marked  G , in the central located under the driver s side dashboard. BONNET SWITCH Connect to the BROWN/LIGHT BLUE wire, in the wiring harness coming out of the bonnet lamp. DOORS SWITCH Connect to the BROWN/WHITE wire in the wiring harness behind the lateral bulkhead, driver s side. BOOT SWITCH Connect to the BLACK/RED wire, at the position nr.8, in the wiring harness coming out of the 17 way light brown connector, in the central located in the rear covering of the passenger s side boot. aua303gbdt.doc Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed as per the instructions given on the product installation manual. SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00 www.cobra.it FITTING DIAGRAM NR. 187 Connection 3800 serie antitheft on AUDI A3 year 2003 ORANGE YELLOW/BLACK VIOLET/WHITE ORANGE/WHITE VIOLET switch inside driver s side door 1N4004 diode +30 BLUE/WHITE at position nr.13 in the 20 way connector inside ground the driver s side door ground 1N5406 diodes BROWN/BLUE GREY/GREEN GREY/BLACK 0,75 mm2 0,75 mm2 in the taped wiring harness coming out of the motor, inside the driver s side door BLACK/WHITE position nr.11 in the connector marked  C under direction indicator the driver s side dashboard ground aua303gbdt.doc Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed as per the instructions given on the product installation manual.

Wyszukiwarka

Podobne podstrony:
Serie 3 2003 diesel YES
A4 2003 diesel YES
A3 1998 diesel YES
A3 2003 diesel NO(1)
Serie 7 2003 diesel NO
A4 1998 diesel YES

więcej podobnych podstron