4831621687

4831621687



101

100 -


>.6


>5


95 -


>4


90 -


>3


85 -


>2


SC *


>1


75 -O


-IDU    *DU    OUU    4ZAJ

Figurę 4.8 Thermogravimetric and differential thermogravimetric curvłes of

CPMT andTCPMT.

4.3.5 Physical and inechanical properties of fi red samples

The main physical and inechanical properties of fired saniples at different temperatures are presented in Figurę 4.9. The increase of firing temperaturę from 950 to 1050°C leads to increase firing shrinkage, loss on ignition, flexural strength and apparent density, while open porosity and water absorption decreased significantiy.

CPMT and TCPMT fired saniples present very different properties. The flexural strength was increased in the case of CPMT from 4.6 (950°C) to 23.3 MPa (1050°C) while it was increased to reach a maximum of 3.1 MPa witli TCPMT fired samples. Simultaneously, open porosity and water absorption decreased significantiy when increasing the firing temperaturę. Tliis behavior is morę pronounced with CPMT fired samples where open porosity and water absorption decreased to reach respectively 5 wt.% and 2 wt.% at 1050°C. However, unhke CPMT fired samples, TCPMT fired



Wyszukiwarka

Podobne podstrony:
78442 SNC00703 j 4,10 4.05 4.00 5.95 3.90 i 3.85 ! 3,80 j 3.75- Kurs euro IV kw
File Setup Repcrts Piet Colon Windcw Help km 95 h 90- 85- WeekM
50 60 95 11O 65 100 120 *> iio 85    130 150 90 140
J. Janecki 120 115 110 105 100 95 85 75 70 [—♦—min ♦ opt —♦—max~
39166 img024 (23) 100 - Tablica R.6.9 R. 6 82 83 84 85 86 87 88 89 90 d M8xl M10xl ,75 Ml
90 Liczba wniesionych skarg na decyzję albo postanowienie Prezesa UODO 85 80 75 2019 2018 70
30 2 - poor Ocena EB Liczba Dunktów kwalifikacvinvch 9,00- 10,00 100 8,00 - 8, 95 90 7,00 -
DSCI8132 Yartołci fukoji $ ( 88 100 99 95 90 eo 70 50 30 0.0 •
rzut wiexby?chowej2 K 2594mę 2494X 9f X 90 ł50!^ 90 90 j
CCF20131128115 118 Tomasz Kościuk 118 Tomasz Kościuk 95 90 75 50 25 10 3 C E N T Y L E Ryc. 36. Sia
img011 (33) 7 Kotły na biomasę (słoma) automatyczne o mocy powyżej 100 kW do 600 kW 0,75 8 Kotły na
s100 101 100 Obliczyć długości następujących łuków 100 1 1. y =    *), xe[-a,a,a >

więcej podobnych podstron