6781097175

F. Durao etat. / The European Journal of Minerał Processing and Environmental Protection Vol.4, No.3, 1303-0868, 2004, pp. 272-281

Table 5

Working conditions of the pilot plant eguipment - Z type Processing Eguipment_Settings_Eguipment_Settings

Opening - 0.5mm Length - 1220mm Width - 360mm Inclination - 10° Length - 950mm Inclination - 20° 50-70rpm Decantation zonę Height - 120mm Width - 95mm

Hydrocyclone

(diameter)

Flotation column (nominał values)

Cyclone - 51.2mm Vortex - 14.5mm Apex - 3.2mm

Q* - 270L/h Qu- 70L/h c_c - 16.5%

Froth zonę height-370mm

3. RESULTS AND DiSCUSSION 3.1. Bench scalę tests

Table 6 shows the best results obtained with V type clay in the bench scalę tests. The very fine cut by hydrocycloning permits the recovery of a product (OF_H), representing about 80% in weight of the raw clay, with a Iow FezC>3 grade (2.82%). The product Processed Clay is the mixture of the flotation underflow (UFr) with the overflow of the hydrocyclone (OF_H). The processed clay. representing about 90% of the raw clay. presents a grade of 2.79% FezCh. However, the titanium grade could not be reduced.

Table 6

Best results of bench tests - V type clay

	Wt (%)			Assays (%)						Distribution (%)
		SiOz	AlzO,	KzO	NazO	FezOj	TiOz	SiOz		KzO	NazO	FezO,	TiOz
Feed	100.0	58.46	21.28	2.41	0.15	3.97	0.95	100.00	100.00	100.00	100.00	100.00	100.00
OF_s'	4.6	30.70	5.00	0.1 1	0.10	26.74	0.19	2.39	1.07	0.21	3.03	30.65	0.91
UF_S'	95.5	59.78	22.06	2.52	0.15	2.89	0.99	97.61	98.95	99.81	95.45	69.48	99.47
of_h	81.8	56.90	25.40	2.77	0.17	2.82	1.02	79.64	97.66	94.04	92.73	58.12	87.85
UF_h	13.6	77.08	1.98	1.04	0.02	3.30	0.80	17.96	1.27	5.88	1.82	1 1.32	1 1.47
OFs²	0.4	51.80	9.10	1.27	0.03	21.23	0.51	0.36	0.18	0.22	0.08	2.19	0.22
UFs'	13.2	77.86	1.76	1.03	0.02	2.75	0.81	17.61	1.09	5.65	1.76	9.16	11.27
OF,¹	1.4	70.30	8.60	1.41	0.03	3.71	0.97	1.66	0.56	0.81	0.28	1.29	1.41
OF,²	0.4	7 1.10	10.60	1.54	0.1 1	3.64	1.15	0.54	0.22	0.28	0.32	0.40	0.53
OF,³	0.4	67.50	9.80	1.44	0.07	3.04	1.19	0.40	0.16	0.21	0.16	0.27	0.44
UF, Processed	11.1	79.40	0.30	0.95	0.01	2.58	0.76	15.01	0.16	4.36	0.74	7.18	8.84
Clay (OF_h+ UF,)	92.9	59.58	22.41	2.55	0.15	2.79	0.99	94.64	97.82	98.40	93.47	65.30	96.69

Despite the numerous tests carried out with different flotation conditions, iron and titanium minerals of this raw clay could not be significantly reduced by froth flotation. It should be pointed out that 80% of the cumulative mass of V type clay is finer than 5|xm. As can be seen in Fig. 6, the kinetics of iron minerals is very slow and the weight percentage rejected in the floated product is very Iow (Fig. 7).

E	Titanium minerals
1 80	Iron minerals

1 60
1 ⁴°
1 20 1

0 10 20 30

Rgure 6. Kinetic curve - V type clay

278