C5EG0HF1 - 607
REMOVAL - REFITTING REAR HEADLIGHT LEVELLING SENSOR
1 -
REMOVAL
Place the vehicle on a lift
.
On the rear part of the anti-roll bar
:
disconnect the connector (1)
using an open-ended spanner, hold the pin (2) and remove the nut (3)
remove the fastener (4)
remove the sensor (5) and its bracket
2 -
REFITTING
Proceed in the reverse order to removal
.
WARNING :
if the yoke (5) is removed, it is important to reposition correctly on the flat of the anti-roll bar, which positions the sensor in angular setting
.
Initialise and check the headlamp levelling corrector parameter
.
Wyszukiwarka
Podobne podstrony:
C5EG0HF1C5EG0HFEC5EG0HF8C5EG0HF4C5EG0HF6C5EG0HF7C5EG0HF5C5EG0HFAC5EG0HFBC5EG0HF9C5EG0HFFC5EG0HFDC5EG0HF2C5EG0HFGwięcej podobnych podstron