C4CG1EK1 - 607
REMOVAL - REFITTING FRONT DOOR LOCK
1 -
TOOLING
[1] : chisel ground to an angle of 30 odeg.
.
2 -
REMOVAL
Remove
:
THE TRIM PAD
THE LOWER OPENING CONTROL
Detach the sealing sheet at the rear section, Carefully
.
Remove the part (1)
.
Using the tool [1], cut the rivet heads (2)
.
Disconnect the connector (3)
.
Remove the burglar-proof cover (4)
.
Remove the fasteners (5)
.
Remove the burglar-proof cover (6) via the opening (A)
.
Remove the fasteners (7)
.
Detach the lock assembly (8) via the door inner panel gap
.
Remove the locking clip (9)
.
Release the bolt (10) from the bracket (11)
.
Remove the bolt (10) from its housing
.
3 -
REFITTING
Position the lock in its location
.
IMPERATIVE :
retrieve the rivets which have fallen in the base of the door
.
Proceed in the reverse order to removal
.
IMPERATIVE :
if the sealing sheet is torn, replace it
.
Check the operation
.
Wyszukiwarka