SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
MAKE
VOLKSWAGEN MOD.
LUPO
YEAR
98 âÄ…Ĺ‚ PETROL
DIESEL
X
ALARM/SIREN
Position the compact alarms and the sirens in the engine compartment, on the POSITION
left of the shock absorber, drivers side to pass the cables use the original core hitch on the right of the bulkhead that divides the engine compartment and the passengers compartment.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the dashboard, drivers side.
POWER SUPPLY
+30: Connect to the original bolt marked â€Ĺ›+ 30” on the feeder busbar, under the dashboard, drivers side.
- 31: Connect with a ring terminal directly to the car body.
IGNITION WIRE
+ 15/50: Connect to the BLACK wire located in the light brown connector behind the left lateral bulkhead, drivers side.
DIRECTION INDICATORS
Connect to the BLACK/GREEN wires at the position nr. 1 of the black connector and BLACK/WHITE at the position nr. 6 in the light blue connector located on the connectors holder plate under the dashboard, drivers side.
ELECTRIC WINDOWS
Comfort closing
The closing of the windows is obtained timing the GREY/YELLOW wire of the vehicle doors locking.
CENTRAL DOORS LOCKING
Negative control signal
Connect to the LIGHT BLUE/VIOLET wire (unlock) and GREY/YELLOW (lock) wire located in the wiring harness coming out of the light brown connector, behind the left lateral bulkhead, drivers side.
IMMOBILISATION POINT
Gasoil pump
Cut the 1,5 mm2 RED/GREEN wire located in the wiring harness coming out of the fuse nr. 36 connected directly to the fuse box.
STARTER
+50: Cut the 2 mm2 RED/BLACK wire in the wiring harness that comes out of the connector of the ignition key.
BONNET SWITCH
Install an additional switch on the headlamp support plate near the original bonnet bumper rubber.
DOORS SWITCH
Connect to the LIGHT BLUE/BROWN wire located in the black connector behind the left lateral bulkhead, drivers side, and the LIGHT BLUE/BROWN wire located in the black connector behind the right lateral bulkhead, passengers side. It is suggested to separate the doors switches lines with diodes.
BOOT SWITCH
In order to protect the boot it is necessary to install an additional switch on the boot member.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed volup98gbd.doc
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
VONBE99GBB id 2134846 NieznanyVONBE99GBD id 2134848 NieznanyVONBE99GBDT id 2134849 NieznanyVONBE99GBDT id 2134849 NieznanyCISAX01GBD id 2064757 NieznanySGH 2200 id 2230801 Nieznany111003105109 stress id 2048457 NieznanyCIXS201GBD id 2064760 NieznanyTOCEL96GBB id 2491297 Nieznany1078 2 FEA209544 128UEN A id 22 NieznanyMcRib(r) Sandwich id 2201097 NieznanyBD V600 L3 C A3 V1[1] 1 id 2157 NieznanyDOC0534 id 2032985 Nieznany8 17 id 2009842 NieznanyREKAN02GBBT id 2491218 Nieznanycialo albatros id 2035175 Nieznany[17] FR540NT010 id 2085454 Nieznanywięcej podobnych podstron