SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FRONTERA
X
MAKE
OPEL
MOD.
YEAR
00 âÄ…Å‚ PETROL
DIESEL
ALARM/SIREN
Position the compact alarms and the sirens in the engine compartment, near the driver’s POSITION
side headlamp.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the left side of the dashboard, driver’s side.
POWER SUPPLY
+ 30: connect to the general power supply located in a multiway connector at the entrance of the fuse box.
- 31: connect with a cable terminal directly to the car body.
IGNITION WIRE
+ 15/54: connect to the LIGHT BLUE/BLACK wire located in the 13 way connector near the steering column.
DIRECTION INDICATORS
Connect to the GREEN/WHITE and GREEN/BLACK wires located in the 13 way connector near the steering column.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side: cut the BROWN/RED wire located in the wiring harness coming out of the driver’s side control switch.
Front window, passenger’s side: cut the BROWN/RED wire located in the wiring harness coming out of the passenger’s side control switch.
Rear window, driver’s side: cut the BROWN/RED wire located in the wiring harness coming out of the driver’s side control switch.
Rear window, passenger’s side: cut the BROWN/RED wire located in the wiring harness coming out of the passenger’s side control switch.
The above connections must be done inside of each door.
CENTRAL DOORS LOCKING
Negative control signal
Connect to the GREEN/RED wire (lock) and to the RED/BLUE wire (unlock) located in the wiring harness coming out of the driver’s side door.
IMMOBILISATION POINT
Fuel pump
If the vehicle has the inertial switch, it is suggested to interrupt one of the two wires coming out of the same.
STARTER
+ 50: Cut the BLACK/WHITE wire located in the 13 way white connector, under the driver’s side dashboard, on the left of the steering column.
BONNET SWITCH
Install an additional switch on the headlamp support plate, near the original bonnet bumper rubber.
DOORS SWITCH
Connect to the BLACK/WHITE wire located in the wiring harness coming out of the central doors locking unit on the rear of the glove compartment, passenger’s side.
BOOT SWITCH
Connect to the wire located in the wiring harness coming out of the boot lamp.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed opfro00gbb.doc
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
OPFRO01GBBT id 2491190 NieznanyOPSIN97GBB id 2205657 NieznanyOPMER03GBB id 2205656 NieznanyOPVEC02GBBT id 2205659 NieznanyCISAX01GBD id 2064757 NieznanySGH 2200 id 2230801 Nieznany111003105109 stress id 2048457 NieznanyCIXS201GBD id 2064760 NieznanyTOCEL96GBB id 2491297 Nieznany1078 2 FEA209544 128UEN A id 22 NieznanyMcRib(r) Sandwich id 2201097 NieznanyBD V600 L3 C A3 V1[1] 1 id 2157 NieznanyDOC0534 id 2032985 Nieznany8 17 id 2009842 NieznanyREKAN02GBBT id 2491218 Nieznanycialo albatros id 2035175 Nieznany[17] FR540NT010 id 2085454 Nieznanywięcej podobnych podstron