44367 Suzuki RM2505
COOLING SYSTEM 10-3
COOLING CIRCUIT INSPECTION
COOLING CIRCUIT
Before removing the radiator and draining angino coolant. inspect the cooling Circuit for tightness.
* Remove the radiator cap.
♦ Connect the tester (i) to the filier.
A WARNING
Give a pressure of about 110 kPa (1.1 kgf/cm2, 15.6 psi) and see if the system holds this pressure for 10 seconds.
If the pressure should fali during this 10-second interval, it means that there is a leaking point in the system. In such a case? inspect the entire system and replace the leaking com-ponent or part.
\
When removing the radiator cap tester, put a rag oh the filier to prevent spouting of engine coolant V\
•v \ v
•V
..A
V
Do not allow the pressure to exceęd> the radiator cap release pressure, or the radiator cah be darnaged.
v->
v
>
v a , •
Inspect the radiator cap for fuhdtion with a radiator cap pressure gauge. v
Radiator cap valve release pressure:
95-125 kPa (0.95 - 1.25 kgf/cm2,14-18 psi)
NOTĘ:
Apply water to radiator cap seaf before fitting the radiator cap to the pressure gauge.
REMOVAL
RADIATOR
• Remove the seat and fuel tank. (ci7"3-2)
♦ Drain engine coolant. (CZ/“2-9)
• Disconnect the radiator hoses.
♦ Remove the radiator guards © and mounting bolts.
Wyszukiwarka
Podobne podstrony:
suzuki rm25005 COOLING SYSTEM 10-3 COOLING SYSTEM 10-3 u/ićtibn with a radiator cap pres-COOLING CI
suzuki rm25007 COOLING SYSTEM 10-5IMPELLER AND GEAR SHAFT • Inspect the impeller and gear shaft for
suzuki rm25009 COOLING SYSTEM 10-7 • Install the dowel pins © and new gasket (D. _CAUTION_ Use a ne
73666 Suzuki RM2507 COOLING SYSTEM 10-5IMPELLER AND GEAR SHAFT * Inspect the impeller and gear shaf
Suzuki RM2509 COOLING SYSTEM 10-7 ♦ Install łhe dowel pins (D and new gasket _CAUTION_ Use a new ga
67687 Suzuki RM2502 FUEL SYSTEM 9-15REMOVAL AND REMOUNTING * Remove the carbureto
Suzuki RM2500 FUEL SYSTEM 9-13 FUEL SYSTEM 9-13CARBURETOR SOLENOIDREMOVAL AND INSPECTION ♦ &n
Suzuki RM250? FUEL SYSTEM 9-1FUEL SYSTEM CONTENTS CONSTRUCTION
70766 Suzuki RM250? FUEL SYSTEM 9-9 Jet
suzuki rm25000 FUEL SYSTEM 9-13CARBURETOR SOLENOIDREMOVAL AND INSPECTION • Remove
suzuki rm25002 FUEL SYSTEM 9-15REMOVAL AND REMOUNTING • Remove the carburetor. (d
suzuki rm25099 ELECTRICAL SYSTEM 17-3 Measure the ignition system peak voltage in the following pro
suzuki rm25001 ELECTRICAL SYSTEM 17-5 Unit: Approx. V Positive © probe pin (Diodę
więcej podobnych podstron