VOGOL98GBD id 2134837 Nieznany


SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

VOLKSWAGEN MOD.

GOLF 4

YEAR

98 âÄ…Ĺ‚ PETROL

DIESEL

X

ALARM/SIREN

Position the modular systems and the sirens in the engine compartment, on the POSITION

bulkhead between the engine compartment and the cabin. Run the cables through the available rubber plug located under the brakes fluid reservoir.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard on the driver’s side. Alternatively, behind the left panel, driver’s side.

POWER SUPPLY

+ 30: connect with an eyelet terminal to the pin marked â€Ĺ›+30” of the terminal strip located on the lower part of the fuse box.

- 31: connect with an eyelet terminal on the grounding shunt up on the left of the fuse box.

IGNITION WIRE

Connect to the 2 mm2 BLACK wire in the central area of the fuse box located on the left panel, driver’s side.

DIRECTION INDICATORS

Connect to the 1 mm2 BLACK/WHITE and BLACK/GREEN wires in the wiring coming out of the connector of the turn indicator switch.

ELECTRIC WINDOWS

For total window roll up time set the alarm unit roll-up pulse to 24s.

CENTRAL DOORS LOCKING

Negative control signal

Connect to the 0,75 mm2 YELLOW/BLUE wire (lock) and to the GREEN/RED wire (unlock) in the horizontal wiring harness that is inside the driver’s door. It is necessary to take off the covering panel.

IMMOBILISATION POINT 1

Cut the BLACK/VIOLET wire connected to the fuse marked nr. 29 located in the fuse box, on the left of the dashboard, driver’s side.

IMMOBILISATION POINT 2

Cut the 1 mm2 RED/VIOLET wire coming out of the fuse marked nr. 32 in the fuse box, on the left of the dashboard, driver’s side.

BONNET SWITCH

Install an additional switch on the headlamp support plate, up on the left of the headlamp, driver’s side.

DOORS SWITCH

Connect to the 1 mm2 GREY/BLUE wire, at the position nr. 16 of the connector coming out of the central doors locking unit located under the dashboard, driver’s side.

BOOT SWITCH

Connect to the 1mm2 BROWN/BLACK wire in the wiring harness of the sill cover, driver’s side.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed vogol98gbd.doc

as per the instructions given on the product installation manual.







Wyszukiwarka

Podobne podstrony:
VOGOL98GBDT id 2134838 Nieznany
VOGOL02GBBTR2 id 2134834 Nieznany
VOGO503GBD id 2134832 Nieznany
VOGO503GBB id 2134831 Nieznany
VOGO503GBB id 2134831 Nieznany
CISAX01GBD id 2064757 Nieznany
SGH 2200 id 2230801 Nieznany
111003105109 stress id 2048457 Nieznany
CIXS201GBD id 2064760 Nieznany
TOCEL96GBB id 2491297 Nieznany
1078 2 FEA209544 128UEN A id 22 Nieznany
McRib(r) Sandwich id 2201097 Nieznany
BD V600 L3 C A3 V1[1] 1 id 2157 Nieznany
DOC0534 id 2032985 Nieznany
8 17 id 2009842 Nieznany
REKAN02GBBT id 2491218 Nieznany
cialo albatros id 2035175 Nieznany

więcej podobnych podstron