suzuki rm25093
16-20 REAR SUSPENSION
• Tighten the rear cushion lever nut to the specified torque. H Rear cushion lever nut: 80 N-m (8.0 kgf-m, 58.0 Ib-ft)
• Reassemble the brake pedał. (CI7“14-14)
• Reassemble the rear caliper assembly.
• Install the rear brake hose guides.
• Reassemble the Chain guide.
• Reassemble the rear wheel. (d7“ 13-4)
REAR SUSPENSION LINKAGE
DISASSEMBLY
• Place a błock under chassis tubes.
• Remove the lower drive Chain control roller ©.
rear cushion rod bolt and nut. cushion lever bolt and nut. shock absorber lower bolt and.
• Remove the cushion rod from the cushion lever.
• Remove the spacers and dust seals.
INSPECTION
• Inspect the cushion lever and cushion rod.
• Inspect the dust seals and spacers for damage.
• Inspect the bearings for damage.
• Remove the
• Remove the
• Remove the
Wyszukiwarka
Podobne podstrony:
Suzuki RM2503 16-20 REAR SUSPENSION 16-20 REAR SUSPENSION • Tighten the rear cush
suzuki rm25083 16-10 REAR SUSPENSION • Apply grease to the needle roller bearings
suzuki rm25085 16-12 REAR SUSPENSIONOIL REPLACEMENT PROCEDURĘ • Remove the rear s
suzuki rm25087 16-14 REAR SUSPENSION • Reinstall the compression adjuster assembl
25868 Suzuki RM2501 16-18 REAR SUSPENSION Jtć* Remove the spacers. Dust seal Washer Thrus
Suzuki RM2507 16-14 REAR SUSPENSION • Reinstall the compression adjuster assembly
Suzuki RM2506 EXHAUSTVALVE 11-7 ♦ Temporarily tighten the bolts ®. ♦
74408 Suzuki RM2501 16-8 REAR SUSPENSION nssi • Remove the rear shock absorber up
suzuki rm25077 16-4 REAR SUSPENSIONREBOUND DAMPING FORCE ADJUSTMENT • Turn the ad
suzuki rm25079 16-6 REAR SUSPENSIONREAR SUSPENSION After the sag measurement has been set between 1
więcej podobnych podstron