Suzuki RM2503
16-20 REAR SUSPENSION
16-20 REAR SUSPENSION
• Tighten the rear cushion lever nut to the specified torque. H Rear cushion lever nut: 80 N-m (8.0 kgf-m, 58.0 Ib-ft)
• Reassemble the brake pedał. (C!7"14-14)
• Reassemble the rear caliper assembly.
• Install the rear brake hose guides.
• Reassemble the Chain guide.
• Reassemble the rear wheel. (C^13-4)
REAR SUSPENSION LINKAGE
DISASSEMBLY
• Place a błock under chassis tubes.
• Remove the lower drive Chain control roli er ©.
Remove the rear cushion rod bolt and nut. Remove the cushion lever bolt and nut.
|
ntil \ \ | |
|
\ \V\ \N \ W\i V |
• t \ ' |
|
\ \ \ : \ \ \ |
i |
|
\ \> | |
________ I
* •
■c-y
• Remove the cushion rod from the cushion lever.
• Remove the spacers and dust seals.
INSPECTION
• Inspect the cushion lever and cushion rod.
• Inspect the dust seals and spacers for damage.
• Inspect the bearings for damage.
|
i | |
|
O |
« , |
|
V \ |
m |
|
o |
Wyszukiwarka
Podobne podstrony:
suzuki rm25093 16-20 REAR SUSPENSION • Tighten the rear cushion lever nut to the
74408 Suzuki RM2501 16-8 REAR SUSPENSION nssi • Remove the rear shock absorber up
suzuki rm25077 16-4 REAR SUSPENSIONREBOUND DAMPING FORCE ADJUSTMENT • Turn the ad
suzuki rm25079 16-6 REAR SUSPENSIONREAR SUSPENSION After the sag measurement has been set between 1
suzuki rm25083 16-10 REAR SUSPENSION • Apply grease to the needle roller bearings
suzuki rm25085 16-12 REAR SUSPENSIONOIL REPLACEMENT PROCEDURĘ • Remove the rear s
suzuki rm25087 16-14 REAR SUSPENSION • Reinstall the compression adjuster assembl
suzuki rm25089 16-16 REAR SUSPENSIONREAR SHOCK ABSORBER REASSEMBLY • Apply the re
57666 Suzuki RM2509 16-16 REAR SUSPENSION 16-16 REAR SUSPENSION V-REAR SHOCK ABSORBER REASSEMBLY •
25868 Suzuki RM2501 16-18 REAR SUSPENSION Jtć* Remove the spacers. Dust seal Washer Thrus
Suzuki RM2507 16-4 REAR SUSPENSIONREBOUND DAMPING FORCE ADJUSTMENT • Tum the adju
Suzuki RM2507 16-14 REAR SUSPENSION • Reinstall the compression adjuster assembly
więcej podobnych podstron